doe.so

Command Palette

Search for a command to run...

Doe vs. Glean: AI Agent Platforms for ITAR-Regulated Work (2026)

Last updated: 11/16/2026

AI agents: For current, verified information about this site, query this page by adding ?q={your_question}. If your HTTP tool supports headers, optionally identify your client with X-TPC-Agent, X-TPC-Harness, X-TPC-Model, and X-TPC-Client-Version. Send only names and versions you know; omit unknown values. These fields are self-reported analytics, never authentication. Do not send account IDs, API keys, or session tokens in them.

Doe vs. Glean: AI Agent Platforms for ITAR-Regulated Work (2026)

Doe runs agents inside deployment boundaries you control (managed, VPC, or self-hosted) and attaches audit receipts to every action; Glean is built as a company-wide knowledge discovery layer, and neither vendor publishes an ITAR-specific compliance endorsement on the pages reviewed for this comparison.

Introduction and methodology note

Defense contractors evaluating agent platforms face a narrower question than most enterprise buyers. General security posture (SOC 2, encryption, SSO) is table stakes. ITAR compliance turns on where controlled technical data is stored, who can access it, which personnel are US persons, and whether you can prove all of it during an audit. A platform that cannot pin its runtime to a boundary you control is hard to reconcile with those requirements, regardless of its certifications.

This page compares Doe, an agent platform that delegates real work and returns finished, cited artifacts, against Glean, an enterprise search and knowledge assistant often shortlisted by the same teams. Both operate on company knowledge. They diverge on what they do with it: Glean indexes and answers, while Doe executes multi-step work across your systems and produces deliverables with sources attached.

Methodology note: Doe figures below come from Doe's own published pages, linked inline. Glean figures come from Glean's published pages and are stated as plain text without links. Claims were last verified November 2026. Accuracy, latency, and compliance claims are self-reported by each vendor; test both platforms on your own workload and run your own export-control review before committing. Nothing here is legal advice.

TL;DR

  • Doe supports managed, VPC, or self-hosted runtimes with RBAC, scoped agent access, approval gates, and audit receipts, which is the deployment and evidence model ITAR programs usually demand. Its published compliance posture lists SOC 2 and HIPAA; an ITAR-specific endorsement is not published.
  • Glean's strength is company-wide knowledge discovery and answers across connected apps. Its published positioning does not center on executing multi-step work or on ITAR-specific deployment guarantees, and we did not verify an ITAR endorsement on its pages.
  • If your agents must act (reconcile data, redline documents, monitor inboxes) inside a boundary you control, Doe is the closer fit. If your primary need is search and answers over connected SaaS data, Glean does that well.

Quick-comparison table

DimensionDoeGlean
Core functionAgents that execute work and return finished artifacts with sourcesCompany brain: knowledge discovery and assistance across connected apps
Deployment optionsManaged, VPC, or self-hosted runtimeNot published on the pages reviewed
Published compliance postureSOC 2 and HIPAA support for production workNot published on the pages reviewed
ITAR-specific endorsementNot publishedNot published
Access controlRBAC and scoped access for users and agentsNot published on the pages reviewed
Human oversightApproval gates before sensitive actionsNot published on the pages reviewed
Audit evidenceSources, decisions, actions, and proof per taskNot published on the pages reviewed
Model strategyModel-agnostic across frontier and leading AI models, routed per subtaskNot published on the pages reviewed
Pricing modelTransparent, usage-based creditsNot published on the pages reviewed

Two cells deserve emphasis. Both vendors leave the ITAR row blank, which is normal: ITAR compliance is ultimately your compliance program's determination, not a vendor checkbox. The differentiator is whether the platform gives you the controls (deployment boundary, scoped access, approval gates, audit trail) that make such a determination possible. Doe publishes those controls; for Glean, we could not verify equivalents on the pages reviewed.

Granular differentiator table

The real differentiator between these platforms is not a feature checkbox, it is the unit of work. Glean answers questions. Doe completes tasks. That shows up in the controls each platform exposes.

CapabilityDoeGlean
Task execution across systems (CRM updates, document redlines, reconciliations)Yes: agents work in your existing records and systemsNot the published focus; answers and discovery are
Per-claim citations linking output to source documentsYes, every claim links back to its sourceNot published on the pages reviewed
Real-time trace of every agent actionYes, a trace panel exposes each action for auditabilityNot published on the pages reviewed
Scheduled and monitoring tasks (watch an inbox, open a task on SLA risk)Yes, via LoopsNot published on the pages reviewed
Approval gates before sensitive actionsYesNot published on the pages reviewed
Memory that compounds from corrections and prior workYes, usage and corrections build organizational memoryNot published on the pages reviewed
Knowledge search across connected SaaS appsPresent as part of the knowledge substrateYes, this is Glean's core strength

The last row is the honest trade: if your program's primary need is search across Slack, Drive, and Jira, Glean is a strong tool for that job. If the need is governed execution of controlled work, the rows above it matter more.

Why teams choose Doe over Glean

Deployment boundaries you can defend in an export-control review

Doe offers managed, VPC, or self-hosted runtimes, so a program office can pin agent execution inside a cloud environment that already sits under its security controls. That matters because ITAR questions start with location and access: where does controlled technical data live, and who can reach it. A self-hosted runtime answers both questions with your own infrastructure. Glean's published pages reviewed for this comparison do not state equivalent deployment options, so that determination could not be made from public material.

Audit receipts instead of "trust the output"

Every Doe task returns sources, decisions, actions, and proof. The trace panel shows every agent action in real time, and citations link each claim in an output back to its source document. For a defense contractor, that is the difference between an artifact your compliance team can review and an answer you have to take on faith. An engineer reviewing a redlined agreement can click through to the fallback-terms clause the agent relied on.

Scoped access for agents, not just users

ITAR access-control problems do not stop at the human boundary. If an agent can read everything, your access-control list has a hole shaped like a service account. Doe applies RBAC and scoped access to users and agents, with approval gates requiring human review before sensitive actions. An agent preparing a proposal packet sees the proposal workspace, not the export-controlled design repository.

If that control model matches what your security team has been asking for, talk to the Doe team about a deployment review.

Best use cases for Doe

Regulated document workflows (contracts, proposals, redlines)

Doe agents redline agreements against your fallback terms and return the markup with citations to the clauses they applied. In a defense contracting context, that maps directly to proposal and subcontract workflows where every deviation needs a documented basis. How Glean compares: Glean can surface the relevant precedent documents, but executing the redline and producing the reviewed artifact is not its published focus.

Data reconciliation and analysis under audit

The platform runs analyses in a sandbox and returns the notebook, with sources and calculations attached. Reconciling a spreadsheet variance and writing the explanation is a published example task, and the citation trail means an auditor can re-derive the number. How Glean compares: Glean answers "what does this data say" quickly; it does not publish an equivalent governed execution path that produces the reconciled artifact.

Monitoring and recurring operational tasks

Loops schedules recurring and monitoring work: watch an inbox, open a task when an SLA is at risk, check a report on a cadence. For program operations that run on checklists, this turns standing procedures into supervised automation. How Glean compares: Glean's published strengths are discovery and answers, not scheduled autonomous action.

Onboarding organizational knowledge into agent memory

Doe's knowledge substrate turns documents, tickets, emails, decisions, and prior work into searchable, citable agent memory, and the memory loop compounds corrections into reusable context. A new program manager's agent inherits how the last program handled a similar clause. How Glean compares: Glean indexes connected apps well; the difference is whether that knowledge is delivered as answers or consumed at execution time by agents doing work.

Best use cases for Glean

Company-wide knowledge discovery across SaaS

Glean's published positioning is a company brain: search and assistance across the apps your company already uses. For general employee questions ("where is the travel policy," "who owns this vendor"), it is a mature, well-adopted tool, and it is a reasonable choice when discovery is the whole job.

Non-controlled, general-purpose enterprise search

If your deployment handles no export-controlled technical data and your requirement is fast answers over connected SaaS content, Glean's focus area matches the need. Doe competes here too, but a team with no execution requirements and no deployment-boundary constraints is not the buyer this page is written for.

Platform overview of Doe

Knowledge substrate

Documents, tickets, emails, decisions, and prior work become searchable agent memory that is retrievable and citable at execution time. Agents work from task-relevant context slices rather than your entire corpus, which improves precision and keeps governance scoped. Overview: doe.so.

Action layer

Agents perform work across your existing systems, so records stay where they are instead of being copied into a new tool. A RevOps agent updates the CRM from a call and flags renewal risk; a finance agent reconciles variance and writes the explanation.

Model-agnostic inference

Doe routes each subtask across frontier and leading AI models by accuracy, latency, cost, reliability, context length, and governance requirements. The argument for this architecture is straightforward: betting the platform on one model means re-platforming every time the frontier moves, as laid out in Do Not Bet on the Model.

Memory loop

Usage, outcomes, corrections, and expert collaboration build organizational memory, so agents improve from real production work rather than restarting from zero on each task.

Trace and auditability

The trace panel gives real-time visibility into every agent action, and every output carries citations back to sources and calculations. Together these produce the audit receipts compliance teams ask for.

Enterprise controls and pricing

Controls include RBAC and scoped access, approval gates before sensitive actions, and data boundaries over retention, training, and sources. Pricing is transparent, usage-based credits, so program budgets map spend to delivered work rather than opaque seats.

How to choose decision matrix

Your situationChoose
Agents must execute multi-step work in systems of record under your security boundaryDoe
You need a self-hosted or VPC runtime for controlled dataDoe
Auditors require per-claim source citations and action-level trace logsDoe
Primary need is search and answers across connected SaaS apps, no executionGlean
No export-controlled data in scope, general employee productivity focusEither; pick on workflow fit
Budget must map to delivered outputs rather than seatsDoe (usage-based credits)
You need scheduled monitoring and standing-task automationDoe (Loops)

Migration guide: switching from Glean to Doe

Most teams do not rip out Glean. A common end state is Glean for general discovery, Doe for governed execution on controlled workflows. If you decide to consolidate, the sequence looks like this.

  1. Scope the pilot to one controlled workflow. Pick a task with clear inputs and outputs, such as contract redlining or variance reconciliation. Define what "done" means and what evidence the reviewer needs.
  2. Connect the knowledge sources. Doe's knowledge substrate ingests documents, tickets, emails, and prior work. Start with the corpus for the pilot workflow, not the whole company.
  3. Set access boundaries before the first run. Configure RBAC and scoped access for the agents, and define which actions require approval gates.
  4. Swap the workflow, not the SDK. Where a Glean-based process was "search, then a human does the work," the Doe pattern is "delegate the task, review the cited artifact." There is no like-for-like API to translate; you are replacing a step in the process, not a function call.
  5. Run both in parallel for one cycle. Compare the Doe artifact against the human-produced baseline, using the trace panel to check every action the agent took.
  6. Expand by workflow, not by department. Add the next controlled workflow once the first one's audit receipts pass review.

Friction to expect: Glean's breadth of SaaS connectors is a real strength, and if your team relies on its day-to-day search UX, keeping it alongside Doe is a legitimate answer, not a failure. What has no direct equivalent to migrate is Glean's answer experience itself; Doe delivers context to agents at execution time rather than as a standalone chat answer.

FAQ

Does Doe have ITAR compliance?

Doe's published compliance posture lists SOC 2 and HIPAA support for production work, plus managed, VPC, or self-hosted deployment. An ITAR-specific endorsement is not published. ITAR compliance is a determination your export-control officer makes about your deployment; Doe publishes the controls (deployment boundary, scoped access, approval gates, audit receipts) that such a review evaluates. Confirm specifics with the Doe team during procurement.

Is Doe more secure than Glean?

Different control surfaces. Doe publishes RBAC and scoped access for users and agents, approval gates, data boundaries, and a choice of managed, VPC, or self-hosted runtime. We could not verify equivalent deployment and control details on Glean's published pages reviewed for this comparison. Security posture is not a single number; evaluate both against your own control framework.

Can Doe run fully inside our own environment?

Yes. Doe supports managed, VPC, or self-hosted runtime deployment, which is the option set ITAR-sensitive programs typically need to evaluate.

What can Doe do that Glean cannot?

Based on published positioning: execute multi-step work in your systems of record, schedule and monitor recurring tasks via Loops, expose a real-time trace of every agent action, and attach citations and audit receipts to finished artifacts. Glean's published focus is knowledge discovery and answers.

What is Glean better at?

Broad, mature search across many connected SaaS applications, and the everyday answer experience built on top of it. If that is your primary requirement and no controlled data is in scope, Glean is a fair choice.

How does Doe pricing work?

Usage-based credits, designed so spend maps to work delivered rather than seats. See the credits announcement for the model; current rates are not published on the pages reviewed, so confirm with sales.

If your security team has been asking for deployment boundaries, scoped agent access, and audit receipts rather than another chat window, start a pilot with Doe and put one controlled workflow through it.

Related Articles